2 Years Warranty by Ghim Soon. Delivery to doorstep
Easy-to-use Quick Select Buttons: • Start/stop • Reverse stitch • Lock stitch • Thread trimming • Needle up/down • Presser foot auto lift Foot Switch Function: Allowing for greater versatility, Juki now offers assigned foot control options. With the ability to assign function to the heel side of the foot controller you can now lift the presser foot, trim threads, reverse stitch or single stitch by pressing on the heel side of the foot controller. Also allowing for no special settings you have complete control to customize your machine to best fit you Presser Foot Pivot Function: When you stop sewing, the needle stops in the down position and presser foot automatically lifts to allow for fabric movement. Sew corners or pivot with ease, when you resume sewing the presser foot automatically lowers for continuous smooth sewing. *This function can also be switched off Setting of the Presser Foot Lifting After Thread Trimming: Because the presser foot is automatically lifted after automatic thread trimming, you can quickly remove fabrics. *This function can also be switched off Adjustable Starting / Reverse Stitch Speed: You can adjust the starting and reverse stitch speed between three steps of fast, normal, and slow Control system Computer Number of stitch patterns 287 Number of available fonts 4 Buttonhole Automatic (sensor system) with clamping plate Direct stitch pattern selection 10 patterns Start/stop button Green: Ready to start and/or while sewing Red: Not ready to start Orange: When the lock stitch button is pressed while the sewing machine is engaged in pattern sewing Maximum stitch speed 1,050 sti/min Automatic needle threader Automatic needle threader Thread tension system Automatic Automatic lock stitch Automatic lock stitch and thread trimming Feed mechanism BOX feed mechanism Presser foot pressure adjustment Stepless adjustment Bobbin thread winder Bobbin winder with independent motor Light 2 LED lights Change in the length/width of stitches Dial system Number of needle position (straight 37 / 3 stitch/other than straight stitch) Memory function 10 patterns Height of lifting of presser foot Button system: 6 mm (1 step/2 steps) Lever system: 6 mm / 12 mm Hard case Hard case with accessory storage part Dimensions 445(W)x291(H)x210(D)mm Dimensions with hard case 510(W)x305(H)x257(D)mm Arm size 8.0"x4.4" (203x112mm) Weight 10.3kg (Include box 15.8kg) Accessories (A)Standard presser foot (B)Zipper presser foot (C)Overcasting presser foot (D)Blind stitch presser foot (E)Buttonhole presser foot (F)Manual buttonhole presser foot (G)Walking foot (H)Patchwork presser foot (I)Quilt presser foot (J)Bobbin (4) (K) Spool cap (Small,Middle & large) (L) T-shape screwdriver (M) Ripper (N) Cleaning Brush (O) Auxiliary spool pin (P) Smooth presser foot (Q) Open toe presser foot (R) Knee-lifting lever (S) Edge sewing presser foot (T) Quilt guide (U)Eyelet punch (V) Needle set HA X 1#11,14,16, for knit #11 & 1set twin needle (W) Foot controller & Power cord (X) Instruction manual & DVD